There may be resin in some FRP tanks. How to detect the resin content in the FRP storage? We have a simple method to detect, and the CANATURE HUAYU factory will introduce it in detail below.

FRP tanks should be clear that resin and fiberglass are non-metal composite tanks made by winding through a microcomputer-controlled machine. Among them, resin content is a concern of many users. Here is a detailed introduction by the professional and technical personnel of CANATURE HUAYU factory. Test method steps for resin content in fiberglass storage tanks.
1. Prepare samples according to general regulations. If the thickness of the experimental material is less than 5mm, the sample thickness shall be the original thickness. If the thickness of the experimental material is greater than 5mm, the original thickness is retained, but the dimensions in other directions do not exceed 5mm.
2. Perform visual inspection of samples according to general regulations.
3. The sample is wiped with a soft cloth with solvent and then treated in the drying chamber for 24 hours, ignoring the time. Put it in a dryer at 80°C for 2 hours and cool at room temperature.
4. 60020 is heated for 10~20min without refurbishment, then put into the dryer, cooled to room temperature, and weighed to the nearest 0.1mg.
5. The prepared sample is 0.1 mg; put into the crucible until it is weighed correctly.
6. Burn the tungsten containing the sample in the furnace. Heated to 350 ~ 400, about 30 minutes, heated to 60020, heated until all the carbon in the sample disappeared. At this time, it takes about 30 minutes for epoxy polyester fiberglass, and about 90 to 120 minutes for phenolic fiberglass.
7. Take out the tungsten with residues from the non-recycled furnace, put it into the dryer to cool, and accurately weigh it to 0.1 mg.
8. Repeated combustion, constant temperature, cooling and measurement, the two measurement results show no difference of 1 mg.
This is the experimental procedure for resin content testing in FRP oil storage tanks. I hope everyone has to help.

English
Español
Português
русский
français
日本語
Deutsch
Tiếng Việt
Italiano
Nederlands
ไทย
Polski
한국어
Svenska
magyar
Malay
বাংলা
Dansk
Suomi
हिन्दी
Pilipino
Türk
Gaeilge
عربى
Indonesia
norsk
اردو
čeština
Ελληνικά
Українська
Javanese
فارسی
தமிழ்
తెలుగు
नेपाली
Burmese
български
ລາວ
Latine
Қазақ
Euskal
Azərbaycan
slovenský
Македонски
Lietuvos
Eesti Keel
Română
Slovenski
मराठी
Српски
简体中文
Esperanto
Afrikaans
Català
עִברִית
Cymraeg
Galego
繁体中文
Latvietis
icelandic
יידיש
Беларус
Hrvatski
Kreyòl ayisyen
Shqiptar
Malti
lugha ya Kiswahili
አማርኛ
Bosanski
Frysk
ជនជាតិខ្មែរ
ქართული
ગુજરાતી
Hausa
Кыргыз тили
ಕನ್ನಡ
Corsa
Kurdî
മലയാളം
Maori
Монгол хэл
Hmong
IsiXhosa
Zulu
Punjabi
پښتو
Chichewa
Samoa
Sesotho
සිංහල
Gàidhlig
Cebuano
Somali
Точик
O'zbek
Hawaiian
سنڌي
Shinra
հայերեն
Igbo
Sundanese
Lëtzebuergesch
Malagasy
Yoruba





